Product ID:DEX-O-TEX P-61 PASTE, 1122
MSDS Date:06/09/1989
FSC:5610
NIIN:00N036534
MSDS Number: BQRCF

Emergency Phone: 201-245-2800

Info Phone: 201-245-2800

Cage: 88167

Telephone: 908-245-2800

Cage: 88167

ACRYLIC POLYMER

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE EYE IRRITATION AND
SKIN RASH. CHRONIC: NOT KNOWN - MATERIAL SHOULD NOT HAVE ANY
CHRONIC AFFECTS.
Explanation of Carcinogenicity:SEE HEALTH HAZARDS.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid:INHAL:MOVE SUBJECT TO FRESH AIR IF NEEDED. EYES:FLUSH W/WATER
FOR AT LEAST 15 MINS. CALL MD IF IRRITATION REMAINS. SKIN:WASH
W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING. INGEST:INDUCE
VOMITING & CALL MD.

Extinguishing Media:DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER IF HEATED ABOVE
212F. POLYMER FILM CAN BURN.

Spill Release Procedures:COAGULATE MATERIAL BY ADDING FERRIC CHLORIDE &
LIME. FLUSH W/WATER OR USE SAND TO ABSORB MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL PLACE. AVOID FREEZING.
DO NOT HEAT ABOVE 200F.
Other Precautions:MATERIAL WILL COAGULATE IF HEATED RAPIDLY; EYE
PROTECTION SHOULD BE WORN.

Respiratory Protection:NONE, IF GOOD VENTILATION IS MAINTAINED. IF NOT,
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST OR MECHANICAL (GENERAL) RECOMMENDED.
Protective Gloves:CHEMICAL RESISTANT OR RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Boiling Pt:B.P. Text:200F,93C
Vapor Pres:AS WATER
Vapor Density:AS WATER
Spec Gravity:1.10 (H*2O=1)
Evaporation Rate & Reference:AS WATER
Solubility in Water:COMPLETELY MISCIBLE
Appearance and Odor:MILKY WHITE LIQUID; MILD ACRYLIC ODOR.
Percent Volatiles by Volume:60

Stability Indicator/Materials to Avoid:YES
AVOID ACIDS - IT WILL CAUSE MATERIAL TO COAGULATE.
Stability Condition to Avoid:AVOID FREEZING - DO NOT HEAT ABOVE 200F.
Conditions to Avoid Polymerization:SEE HEALTH HAZARDS.

Waste Disposal Methods:SANITARY LANDFILL IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.